# Generated by pykickstart v3.34
#version=DEVEL
# X Window System configuration information
xconfig  --startxonboot
# Keyboard layouts
keyboard 'us'
# Root password
rootpw --iscrypted --lock locked
# System language
lang en_US.UTF-8
# Shutdown after installation
shutdown
# Network information
network  --bootproto=dhcp --device=link --activate
# Firewall configuration
firewall --enabled --service=mdns
# System timezone
timezone US/Eastern
# SELinux configuration
selinux --enforcing
# System services
services --disabled="sshd" --enabled="NetworkManager,ModemManager"
# System bootloader configuration
bootloader --location=none
# Clear the Master Boot Record
zerombr
# Partition clearing information
clearpart --all
# Disk partitioning information
part / --fstype="ext4" --size=10120

# Repos
%include repo-list.txt

# Packages
# rpm -qa --qf "%{n}\n" | grep -v pubkey | sort > package-list.txt
%packages
%include package-list-lxde.txt
%end

%post
# FIXME: it'd be better to get this installed from a package
cat > /etc/rc.d/init.d/livesys << EOF
#!/bin/bash
#
# live: Init script for live image
#
# chkconfig: 345 00 99
# description: Init script for live image.
### BEGIN INIT INFO
# X-Start-Before: display-manager chronyd
### END INIT INFO

. /etc/init.d/functions

if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
    exit 0
fi

if [ -e /.liveimg-configured ] ; then
    configdone=1
fi

exists() {
    which \$1 >/dev/null 2>&1 || return
    \$*
}

livedir="LiveOS"
for arg in \`cat /proc/cmdline\` ; do
  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
    livedir=\${arg##rd.live.dir=}
    continue
  fi
  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
    livedir=\${arg##live_dir=}
  fi
done

# enable swapfile if it exists
if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
fi

mountPersistentHome() {
  # support label/uuid
  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
  fi

  # if we're given a file rather than a blockdev, loopback it
  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
    # mtd devs don't have a block device but get magic-mounted with -t jffs2
    mountopts="-t jffs2"
  elif [ ! -b "\$homedev" ]; then
    loopdev=\`losetup -f\`
    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
    fi
    losetup \$loopdev \$homedev
    homedev=\$loopdev
  fi

  # if it's encrypted, we need to unlock it
  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
    echo
    echo "Setting up encrypted /home device"
    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
    homedev=/dev/mapper/EncHome
  fi

  # and finally do the mount
  mount \$mountopts \$homedev /home
  # if we have /home under what's passed for persistent home, then
  # we should make that the real /home.  useful for mtd device on olpc
  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
  [ -x /sbin/restorecon ] && /sbin/restorecon /home
  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
}

findPersistentHome() {
  for arg in \`cat /proc/cmdline\` ; do
    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
      homedev=\${arg##persistenthome=}
    fi
  done
}

if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
  findPersistentHome
elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
  homedev=/run/initramfs/live/\${livedir}/home.img
fi

# if we have a persistent /home, then we want to go ahead and mount it
if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
  action "Mounting persistent /home" mountPersistentHome
fi

if [ -n "\$configdone" ]; then
  exit 0
fi

# add liveuser user with no passwd
action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
passwd -d liveuser > /dev/null
usermod -aG wheel liveuser > /dev/null

# Remove root password lock
passwd -d root > /dev/null

# turn off firstboot for livecd boots
systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
systemctl stop firstboot-text.service 2> /dev/null || :
systemctl stop firstboot-graphical.service 2> /dev/null || :

# don't use prelink on a running live image
sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :

# turn off mdmonitor by default
systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
systemctl stop mdmonitor.service 2> /dev/null || :
systemctl stop mdmonitor-takeover.service 2> /dev/null || :

# don't start cron/at as they tend to spawn things which are
# disk intensive that are painful on a live image
systemctl --no-reload disable crond.service 2> /dev/null || :
systemctl --no-reload disable atd.service 2> /dev/null || :
systemctl stop crond.service 2> /dev/null || :
systemctl stop atd.service 2> /dev/null || :

# turn off abrtd on a live image
systemctl --no-reload disable abrtd.service 2> /dev/null || :
systemctl stop abrtd.service 2> /dev/null || :

# Don't sync the system clock when running live (RHBZ #1018162)
sed -i 's/rtcsync//' /etc/chrony.conf

# Mark things as configured
touch /.liveimg-configured

# add static hostname to work around xauth bug
# https://bugzilla.redhat.com/show_bug.cgi?id=679486
# the hostname must be something else than 'localhost'
# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
hostnamectl set-hostname "localhost-live"

EOF

# bah, hal starts way too late
cat > /etc/rc.d/init.d/livesys-late << EOF
#!/bin/bash
#
# live: Late init script for live image
#
# chkconfig: 345 99 01
# description: Late init script for live image.

. /etc/init.d/functions

if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
    exit 0
fi

exists() {
    which \$1 >/dev/null 2>&1 || return
    \$*
}

touch /.liveimg-late-configured

# read some variables out of /proc/cmdline
for o in \`cat /proc/cmdline\` ; do
    case \$o in
    ks=*)
        ks="--kickstart=\${o#ks=}"
        ;;
    xdriver=*)
        xdriver="\${o#xdriver=}"
        ;;
    esac
done

# if liveinst or textinst is given, start anaconda
if strstr "\`cat /proc/cmdline\`" liveinst ; then
   plymouth --quit
   /usr/sbin/liveinst \$ks
fi
if strstr "\`cat /proc/cmdline\`" textinst ; then
   plymouth --quit
   /usr/sbin/liveinst --text \$ks
fi

# configure X, allowing user to override xdriver
if [ -n "\$xdriver" ]; then
   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
Section "Device"
	Identifier	"Videocard0"
	Driver	"\$xdriver"
EndSection
FOE
fi

EOF

chmod 755 /etc/rc.d/init.d/livesys
/sbin/restorecon /etc/rc.d/init.d/livesys
/sbin/chkconfig --add livesys

chmod 755 /etc/rc.d/init.d/livesys-late
/sbin/restorecon /etc/rc.d/init.d/livesys-late
/sbin/chkconfig --add livesys-late

# enable tmpfs for /tmp
systemctl enable tmp.mount

# make it so that we don't do writing to the overlay for things which
# are just tmpdirs/caches
# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
cat >> /etc/fstab << EOF
vartmp   /var/tmp    tmpfs   defaults   0  0
EOF

# work around for poor key import UI in PackageKit
rm -f /var/lib/rpm/__db*
echo "Packages within this LiveCD"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*

# go ahead and pre-make the man -k cache (#455968)
/usr/bin/mandb

# make sure there aren't core files lying around
rm -f /core*

# remove random seed, the newly installed instance should make it's own
rm -f /var/lib/systemd/random-seed

# convince readahead not to collect
# FIXME: for systemd

echo 'File created by kickstart. See systemd-update-done.service(8).' \
    | tee /etc/.updated >/var/.updated

# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
# See bug 1317709
rm -f /boot/*-rescue*

# Disable network service here, as doing it in the services line
# fails due to RHBZ #1369794
/sbin/chkconfig network off

# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id

# LXDE and LXDM configuration

# create /etc/sysconfig/desktop (needed for installation)
cat > /etc/sysconfig/desktop <<EOF
PREFERRED=/usr/bin/startlxde
DISPLAYMANAGER=/usr/sbin/lxdm
EOF

cat >> /etc/rc.d/init.d/livesys << EOF
# disable screensaver locking and make sure gamin gets started
cat > /etc/xdg/lxsession/LXDE/autostart << FOE
/usr/libexec/gam_server
@lxpanel --profile LXDE
@pcmanfm --desktop --profile LXDE
/usr/libexec/notification-daemon
FOE

# set up preferred apps 
cat > /etc/xdg/libfm/pref-apps.conf << FOE 
[Preferred Applications]
WebBrowser=firefox.desktop
MailClient=sylpheed.desktop
FOE

# set up auto-login for liveuser
sed -i 's/# autologin=.*/autologin=liveuser/g' /etc/lxdm/lxdm.conf

# Show harddisk install on the desktop
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop

# create default config for clipit, otherwise it displays a dialog on startup
mkdir -p /home/liveuser/.config/clipit
cat > /home/liveuser/.config/clipit/clipitrc  << FOE
[rc]
use_copy=true
save_uris=true
save_history=false
statics_show=true
single_line=true
FOE

# this goes at the end after all other changes.
chown -R liveuser:liveuser /home/liveuser
restorecon -R /home/liveuser

EOF

%end

%post --nochroot
# For livecd-creator builds only (lorax/livemedia-creator handles this directly)
if [ -n "$LIVE_ROOT" ]; then
    cp "$INSTALL_ROOT"/usr/share/licenses/*-release-common/* "$LIVE_ROOT/"

    # only installed on x86, x86_64
    if [ -f /usr/bin/livecd-iso-to-disk ]; then
        mkdir -p "$LIVE_ROOT/LiveOS"
        cp /usr/bin/livecd-iso-to-disk "$LIVE_ROOT/LiveOS"
    fi
fi

%end